skip to Main Content

HI-CREATE Diaper Production Line

Rated 0 out of 5
(be the first to review)

The Diaper Production Line is also called T shape Diaper Production Line or Nappy Production Line, there are mainly two types of Diaper Production Line, one is the Baby Diaper Production Line, the other is Adult Diaper Production Line. It’s mainly used to produce all kinds of diapers and sanitary products. HI-CREATE is one of the best suppliers and manufactures of Diaper Production Line from China. Our Nappy Production Line adopts new technology, high accuracy, low cost, humanized design to realize intelligent production.If you want to buy Nappy Production Line, See details below:


HI-CREATE Diaper Production Line Features and Advantages

1.Our Diaper Production Line is equipped with powerful full servo control system and electrical system. The full servo control system has high speed, high efficiency, visual and intelligent control. The electric system adopts centralized management and modularization design of power supply and control centre.

2.Our Nappy Production Line is equipped with a perfect quality detection system and zero-speed feeding system, boot-up automatic phase control and detection system.

3.Modular design, humane operation, stability up to the international level of high-end equipment, the whole machine to achieve a one-button number change operation, perfect production management data statistical analysis.

4.Adopting the new technology, the absorber can absorb quickly, diffuse rapidly, and control the reverse osmosis and fault phenomena effectively.

5.Three-dimensional protective fabrics in the machine composite molding, elastic waist, front waist paste automatic cutting, rubber extension can be adjusted at will.

6.During production, raw materials are transported by vacuum absorption, uncoiling and feeding automatically. Servo motor controls tension and is equipped with a deviation corrector.

7.The polymer is mixed with wood pulp, and the servo motor controls the addition amount.

8.Our Diaper Production Line is equipped with toothed high-speed crusher, smashed and untreated slurry, with noise proof cover and protective safety door.

9.Temperature control on the production line can be directly operated on the touch screen, and can display the temperature of each section of the whole production line at the same time. Once changed, the temperature setting must be set to each temperature control table separately.

Nappy Production Line Device Configuration

Monitoring and control system:

1.The human-machine interface adopts imported color touch screen.

2.Import PCL programmable system.

3.PCL and human- machine interface with the realization of man-machine dialogue: real-time operation on the touch screen, display and view the fault or modify data,spraying glue manually, automatic control.

4.Rotary temperature control is accomplished by imported temperature controller.

Sensors use proximity switches, photoelectric switches, optical fibers and encoders.

5.Soft start function, motor starts in sequence.

Feeding and driving parts:

1.wood pulp, polymer feeding frequency conversion speed control, polymer quantitative mixing.

2.Wood pulp and high molecular weight can be set from the human machine interface.

3.Main engine frequency conversion timing drive.

Partial distribution of electrical apparatus:

1.The electrical cabinet placed behind the equipment, using the specification line slot.

2.The control points of the whole machine should be installed nearby.

Automatic waste monitoring and elimination system:

1.When the material is changed, the position of the automatic memory connector.

2.Elastic waist waist, front waist paste, left and right missing material automatic kick.

3.Automatic material breakage detection and alarm shutdown.

Heating system:

1.The introduction of power and the removal of temperature signal are completed by carbon brush.

2.Heating element used for heating the rotating body adopts electric heating tube.

3.Heating cylinder is pressurized.

Correction and correction system:

1.Eight sets of recorders.

2.Distribution of rectifier: two sets of non-woven fabrics on both sides, one set of non-woven fabrics in the middle, one set of elastic waist, one set of non-woven fabrics on the dredging layer and three sets of side belt on-line.

Other control:

1.tricolor warning lamp, automatic alarm function.

2.Schneider low voltage electronic components.

3.Phrase rotation with phrase requirements can achieve phase adjustment without stopping.

4.Cooperating with hot melt adhesive, it can realize automatic gluing, stop automatically when the machine stops, and realize manual control.

5.Inspection lamp glue spraying station and rear transmission observation lamp are equipped with emergency stop safety cable.

6.Automatic counting of products.

HI-CREATE Pre-sale Service

Free consultation, technical support, liaison and other demand services.

HI-CREATE Payment Method

1.The two sides signed the contract and signed it by means of the official seal.

2.The purchaser must be pay 30% deposit in advance, and the deposit is checked by our factory. The production staff will be responsible for preparing, assembling, installing and debugging materials.

3.After the customer comes to our factory or sends the mechanical video online to the customer to check the goods, and reaches the customer demand, the customer makes the remaining money again, our factory arranges the delivery immediately after checking the money, and then sends the technical personnel to install and debug the training.

HI-CREATE Sale Service

1.We provide free delivery, installation, commissioning, operator training and other services.

2.Debugging and Installation: after the product enters the customer designated place, after the customer is ready to complete the required materials and inform our factory, our factory will arrange personnel need to train the operator of the customer until the operator can operate independently.

3.After the commissioning is qualified, the customer will fill

in the comments and seal on the commissioning acceptance report.

HI-CREATE After-sale Service

1.After the product is debugged, it will provide one year warranty and free maintenance for life.

2.Door-to-door maintenance: after the customer discovers the product breakdown and notifies our factory, our factory will reply within 24 hours. If you need to replace the parts, our factory will send the required spare parts to customers within 72 hours, and through the telephone or door-to-door guidance for replacement and installation.

Additional information

Dimensions 33 x 12 x 5 cm


There are no reviews yet.

Be the first to review “HI-CREATE Diaper Production Line”

Your email address will not be published. Required fields are marked *